Bosch Dishwasher Error Code E24

When your Bosch dishwasher displays error code e24, it means that the dishwasher is not draining properly due to the drain filter being blocked. Along with the E24 error code, you are likely to encounter several indicative symptoms signaling a drainage problem in your Bosch dishwasher. You may observe water pooling at the bottom of the dishwasher post-cycle, experience an interruption during operation with the dishwasher pausing or stopping unexpectedly, or hear unusual noises such as gurgling or humming. These all point towards a clog due to the drain filter being blocked.

Possible causes for the E24 error code:

• The drain hose could be blocked
• The dishwasher filter may need to be cleaned
• Brand new garbage disposal. The installer may have forgotten to remove the ‘knockout’ plug

There could be several reasons for it. To find out the cause of an E24 error code, please check the following things:

1. Check the inlet hose and ensure it's not kinked or damaged.

2. Check the siphon connection and ensure it's sealed.

3. The pump cover may be loose. Please locate it under the filter and ensure that it's not loose. Review your owner's manual to learn where it's located. Download your manual here if you don't have a copy of it.

4. If the dishwasher drain hose is connected to a garbage disposal's dishwasher drain connection, ensure that the plug is removed from the disposer’s dishwasher drain connection.

5. After fixing the problem, reset the dishwasher and error code according to the owner’s manual.

Bosch Dishwasher Manuals

If the steps outlined above haven't resolved the E24 error code on your Bosch dishwasher, don't worry—we're here to help. Our Bosch Customer Service team is dedicated to providing you with the support and solutions needed to get your dishwasher back to its optimal performance.

Please contact Bosch Customer Service at 1-800-944-2904 if you need further assistance.